REAR VIEW MONITOR SYSTEM (for Radio and Display Type) Screen Flicker or Color Distortion

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DISPLAY SETTING


    1. Push the "SETUP" button and select the "Display" switch.

    2. Select the "Camera" button and enter the "Display (Camera)" screen.

      A01DZ4BE01
      Text in Illustration
      *a Example - -

    3. Reset the display settings (contrast and brightness) and check that the screen appears normal.

      OK
      The display returns to normal.

    NG

    Click here

    OK

    END

  2. CHECK CABIN TEMPERATURE


    1. Check that the cabin temperature is higher than -20°C (-4.0°F).

      OK
      The cabin temperature is higher than -20°C (-4.0°F).

    NG

    HEAT CABIN AND RECHECK TEMPERATURE

    OK

  3. CHECK COLOR BAR


    1. A01E1HF

      Enter the "Color Bar Check Mode" screen Click here.

    2. Check that the color bars match the displayed names.

      OK
      Color bars match the displayed names.

    NG

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here