CRUISE CONTROL MAIN SWITCH INSPECTION


  1. INSPECT CRUISE CONTROL MAIN SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      A01DXZKE15
      Text in Illustration
      *a

      Component without harness connected

      (Cruise Control Main Switch)

      		 - -
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (ECC) - 3 (CCS) Neutral 1 MΩ or higher
      1 (ECC) - 3 (CCS) +RES 235 to 245 Ω
      1 (ECC) - 3 (CCS) -SET 617 to 643 Ω
      1 (ECC) - 3 (CCS) CANCEL 1509 to 1571 Ω
      1 (ECC) - 3 (CCS) Main switch off 1 MΩ or higher
      1 (ECC) - 3 (CCS) Main switch on Below 2.5 Ω

      If the result is not as specified, replace the cruise control main switch.