BRAKE PEDAL(for RHD) REMOVAL

PROCEDURE

  1. REMOVE COMBINATION METER ASSEMBLY

    Click here

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Tip:

    Use the same procedure as for LHD.

    Click here

  3. REMOVE STOP LIGHT SWITCH ASSEMBLY

    Click here

  4. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

    Click here

  5. REMOVE BRAKE PEDAL RETURN SPRING

    1. C269480

      Remove the brake pedal return spring from the brake pedal support assembly and push rod pin.

  6. REMOVE PUSH ROD PIN

    1. C269481

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

    1. C269485

      Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement assembly.

    2. C269482N01

      Disengage the clamp (a) and separate the wire harness from the brake pedal support assembly.

    3. for Manual Transaxle:

      Disengage the clamp (b) and separate the wire harness from the brake pedal support assembly.

    4. C269483

      Remove the 4 nuts and brake pedal support assembly.

    5. C269486

      Remove the nut from the brake pedal support assembly.