REAR DOOR WINDOW FRAME MOULDING INSTALLATION

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. INSTALL REAR DOOR FRONT WINDOW FRAME MOULDING

    Tech Tips

    When installing the rear door front window frame moulding, heat the vehicle body and rear door front window frame moulding using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Moulding 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or rear door front window frame moulding excessively.


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Clean the rear door front window frame moulding (if reusing the rear door front window frame moulding).


      1. Using a heat light, heat the rear door front window frame moulding.

      2. Remove the double-sided tape from the rear door front window frame moulding.

      3. Wipe off any tape adhesive residue with cleaner.

      4. A005DB8E02
        Text in Illustration
        *1 Double-sided Tape (A)
        *2 Double-sided Tape (B)
        *3 Double-sided Tape (C)

        Apply new double-sided tape to the rear door front window frame moulding.

        Item Dimension
        A 0.8 mm (0.0315 in.)
        B 1.2 mm (0.0472 in.)
        C 5.0 mm (0.197 in.)
        D 15.0 mm (0.591 in.)
        E 40.0 mm (1.57 in.)
        F 410.0 mm (1.35 ft.)
        G 450.0 mm (1.48 ft.)
    3. A005DE2E03
      Text in Illustration
      *1 Double-sided Tape

      Install the rear door front window frame moulding.


      1. Using a heat light, heat the vehicle body and rear door front window frame moulding.

      2. Remove the release paper from the face of the rear door front window frame moulding.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the clip and guide to install the rear door front window frame moulding.

  3. INSTALL REAR DOOR BELT MOULDING ASSEMBLY

    Click here

  4. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

    Click here

  5. INSTALL REAR DOOR REAR GUIDE SEAL

    Click here

  6. INSTALL REAR DOOR WINDOW GUIDE SUB-ASSEMBLY

    Click here

  7. INSTALL REAR DOOR GLASS RUN

    Click here

  8. INSTALL REAR DOOR SERVICE HOLE COVER

    Click here

  9. INSTALL REAR DOOR TRIM BRACKET

    Click here

  10. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  11. INSTALL REAR DOOR ARMREST COVER

    Click here

  12. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    Click here

  13. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  14. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  15. INSTALL DECK FLOOR BOX RH

    Click here

  16. INSTALL REAR DECK FLOOR BOX

    Click here

  17. INSTALL NO. 1 DECK BOARD

    Click here

  18. INSTALL NO. 2 DECK BOARD

    Click here

  19. INSTALL DECK BOARD ASSEMBLY

    Click here

  20. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  21. INSPECT POWER WINDOW OPERATION

    Click here