REAR DRIVE SHAFT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  2. REMOVE REAR AXLE SHAFT NUT LH

    Click here

  3. REMOVE REAR DRIVE SHAFT ASSEMBLY LH


    1. A004JJZ

      Using a plastic hammer, separate the rear drive shaft assembly LH from the rear axle carrier. If it is difficult to separate, tap the end of the rear drive shaft assembly LH using a brass bar and a hammer.

    2. Remove the rear drive shaft assembly LH.

      Note


      • Be careful not to damage the joint boot or speed sensor.

      • Do not push out the rear axle carrier excessively.

  4. REMOVE REAR AXLE SHAFT NUT RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. REMOVE REAR DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.