BRAKE MASTER CYLINDER(for LHD) DISASSEMBLY

PROCEDURE

  1. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

    1. Secure the brake master cylinder sub-assembly in a vise.

      Note:

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. C302740

      Using a T20 "TORX" socket wrench, remove the "TORX" screw and brake master cylinder reservoir assembly from the brake master cylinder body.

      Note:

      Do not drop the brake master cylinder reservoir assembly.

    3. Remove the brake master cylinder body from the vise.

  2. REMOVE MASTER CYLINDER RESERVOIR GROMMET

    1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder body.

  3. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  4. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER