BACK WINDOW LOCK INSPECTION

PROCEDURE

  1. INSPECT BACK WINDOW LOCK ASSEMBLY

    B241626C01

    *a

    Component without harness connected

    (Back Window Lock Assembly)

    *b

    Moves to Open Position

    *c

    Closed Position

    -

    -

    1. Apply battery voltage to the back window lock motor and check the operation of the back window lock assembly.

      OK

      Measurement Condition

      Specified Condition

      Battery positive (+) → 3 (+)

      Battery negative (-) → 4 (-)

      Open Position

      If the result is not as specified, replace the back window lock assembly.

    2. Measure the resistance of the back window lock.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      2 (+) - 1 (-)

      Open Position

      Below 1 Ω

      Closed Position

      10 kΩ or higher

      If the result is not as specified, replace the back window lock assembly.