FUEL SENDER GAUGE ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT FUEL SENDER GAUGE ASSEMBLY

    1. A292796C01

      *a

      Component without wire harness connected

      (Fuel Sender Gauge Assembly)

      Check that the float moves smoothly between F and E.

    2. Measure the resistance between terminals 1 and 2 of the connector.

      Standard Resistance

      Float Level

      Resistance (Ω)

      F

      12.0 to 18.0

      Between E and F

      12.0 to 415.0 (Gradually changes)

      E

      405.0 to 415.0

      If the result is not as specified, replace the fuel sender gauge assembly.