LEXUS PARKING ASSIST-SENSOR SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE LEXUS PARKING ASSIST-SENSOR SYSTEM

    Tip:

    The following items can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    1. Customizing with the Intelligent Tester

      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Utility / Customize / Warning, Sensor or Display.

      5. Select the setting by referring to the table below.

        Warning

        Tester Display

        Description

        Default

        Setting

        ECU

        Fr Sensor Onset Range

        Set the buzzer activation range for the front center sensors.

        Wide

        0:Narrow,1:Wide

        • Clearance warning ECU*1

        • Parking assist ECU*2

        Rr Sensor Onset Range

        Set the buzzer activation range for the rear center sensors.

        Wide

        0:Narrow,1:Wide

        • Clearance warning ECU*1

        • Parking assist ECU*2

        Keep Sense Buzzer

        Make the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.

        Avail

        0:Not Avail,1:Avail

        • Clearance warning ECU*1

        • Parking assist ECU*2

        Fr & Rr Buzzer Volume

        Change the buzzer volume setting.

        M2

        001:L,010:M1,011:M2,100:M3,101:H

        • Clearance warning ECU*1

        • Parking assist ECU*2

        • *1: w/o Parking Assist Monitor System and/or Side Monitor System

        • *2: w/ Parking Assist Monitor System and/or Side Monitor System

        Sensor

        Tester Display

        Description

        Default

        Setting

        ECU

        Sensor Condition N

        Make the front sensors available when the shift lever is in N.

        Avail

        0:Not Avail,1:Avail

        • Clearance warning ECU*1

        • Parking assist ECU*2

        Reverse Range Front Sensor

        Change the operation setting for the front sensors when the shift lever is in R.

        Fcrn

        00:F,01:Fcrn,10:F Stop

        • Clearance warning ECU*1

        • Parking assist ECU*2

        Non P/R Range Rear Sensor

        Change the operation setting for the rear sensors when the shift lever is in any position except P or R.

        R Stop

        00:R,01:Rcrn,10:R Stop

        • Clearance warning ECU*1

        • Parking assist ECU*2

        • *1: w/o Parking Assist Monitor System and/or Side Monitor System

        • *2: w/ Parking Assist Monitor System and/or Side Monitor System

        Display

        Tester Display

        Description

        Default

        Setting

        ECU

        Display Mode

        Change the display mode setting (when the LEXUS parking assist-sensor system is normal).

        All

        01:All,11:Undisp

        • Clearance warning ECU*1

        • Parking assist ECU*2

        • *1: w/o Parking Assist Monitor System and/or Side Monitor System

        • *2: w/ Parking Assist Monitor System and/or Side Monitor System

    2. Customizing with Multi-display

      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / LEXUS Park Assist.

      3. Select the setting by referring to the table below.

        Display

        Default

        Content

        Setting

        Relevant ECU

        Alert volume

        3

        Change the buzzer volume setting.

        1, 2, 3, 4 or 5

        • 1: Low volume

        • 2: Medium low volume

        • 3: Medium volume

        • 4: Medium high volume

        • 5: High volume

        • Clearance warning ECU*1

        • Parking assist ECU*2

        Display

        On

        Change the display mode setting (when the LEXUS parking assist-sensor system is normal).

        On or Off

        • Clearance warning ECU*1

        • Parking assist ECU*2

        Distance

        Wide

        Set the buzzer activation range for the front center sensors.

        Narrow or Wide

        • Narrow: 500 mm (19.69 in.)

        • Wide: 1000 mm (39.37 in.)

        • Clearance warning ECU*1

        • Parking assist ECU*2

        Set the buzzer activation range for the rear center sensors.

        Narrow or Wide

        • Narrow: 650 mm (25.59 in.)

        • Wide: 1500 mm (59.06 in.)

        • Clearance warning ECU*1

        • Parking assist ECU*2

        • *1: w/o Parking Assist Monitor System and/or Side Monitor System

        • *2: w/ Parking Assist Monitor System and/or Side Monitor System