PATTERN SELECT SWITCH INSPECTION

PROCEDURE

  1. INSPECT PATTERN SELECT SWITCH ASSEMBLY

    1. C322328E02

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 (MSW2) - 4 (MSW1)

      Combination switch (SPORT) on

      Below 1 Ω

      Combination switch (SPORT) off

      10 kΩ or higher
      Table 1. Text in Illustration

      *a

      Component without harness connected

      (Pattern Select Switch Assembly)

      If the result is not as specified, replace the pattern select switch assembly.