PARKING ASSIST ECU(for LHD) INSTALLATION

PROCEDURE

1. INSTALL PARKING ASSIST ECU

   
   

   1. Install the parking assist ECU with the bolt and nut.

   2. Connect each connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. INSTALL INSTRUMENT PANEL GARNISH RH

   Click here

5. INSTALL COWL SIDE TRIM BOARD RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

6. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

7. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

9. PERFORM INITIALIZATION

   Click here

10. PERFORM PANORAMIC VIEW MONITOR SYSTEM CALIBRATION

    Click here