IMMOBILISER SYSTEM(w/o Entry and Start System) PROBLEM SYMPTOMS TABLE

Tip:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Table 1. Immobiliser System

Symptom

Suspected Area

Link

Engine does not start because no initial combustion occurs

Proceed to "Engine does not Start because No Initial Combustion"

Click hereClick here

Engine does not start but initial combustion occurs

Proceed to "Engine does not Start but Initial Combustion Occurs"

Click hereClick hereClick here

Security indicator light does not blink

Proceed to "Security Indicator Light Does not Blink"

Click here

Key cannot be registered

Proceed to "Key Cannot be Registered"

Click here