MULTI-MODE MANUAL TRANSAXLE ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL TCM

   1. Install the TCM to the body with the 2 bolts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

   2. Connect the 4 connectors to the TCM.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

5. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

   Click here

6. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

   Click here

7. PERFORM SYNCHRONIZATION POSITION CALIBRATION

   Click here