WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Wireless Door Lock.

      5. Select the setting by referring to the table below.


        Wireless Door Lock
        Tester Display Description Default Setting ECU
        Wireless Control Function that turns the wireless door lock control system on or off ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Hazard Answer Back Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Unlock 2 Operation Function that unlocks driver door when unlock switch on door control transmitter assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON or OFF*1 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
        Auto Lock Time Function that regulates the interval between unlocking and automatic relocking of doors 30s or 60s*1 00:30 s,01:60 s,10:120 s Main body ECU (Multiplex network body ECU)

        • *1: Default setting differs depending on destination.