ABSORBER CONTROL ACTUATOR(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT ABSORBER CONTROL ACTUATOR


    1. A01HGVNC02
      *a

      Component without harness connected

      (Absorber Control Actuator)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LH Side
      Tester Connection Condition Specified Condition
      1 (+) - 3 (-) 15 to 25°C 2.8 to 4.4 Ω
      for RH Side
      Tester Connection Condition Specified Condition
      1 (+) - 3 (-) 15 to 25°C 2.8 to 4.4 Ω