FRONT APRON TO COWL SIDE MEMBER ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol meaning
    A0050K6 Remove Weld Points
    A0050HS Remove Weld Points
    A0050JA Remove Weld Points

      REMOVAL POINT

    1. After removing the front apron to cowl side member lower front, remove the front apron to cowl side member upper.

    A0050I3E01
    *a FRONT APRON TO COWL SIDE MEMBER LOWER FRONT
    *b FRONT APRON TO COWL SIDE MEMBER UPPER

  2. INSTALLATION

    Symbol meaning
    A0050CS Plug Weld
    A0050L9 Plug Weld
    A0050HG Plug Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After welding the front apron to cowl side member upper to the vehicle side, install the front apron to cowl side member lower front.

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0050J8E01
    *1 FRONT FENDER APRON GUSSET LOWER
    *2 FRONT APRON TO COWL SIDE MEMBER UPPER
    *3 FRONT APRON TO COWL SIDE MEMBER LOWER FRONT