INTAKE MANIFOLD REMOVAL

PROCEDURE


  1. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  2. REMOVE EGR PIPE ASSEMBLY

    Click here

  3. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

    Click here

  4. REMOVE PURGE VSV

    Click here

  5. REMOVE INTAKE MANIFOLD


    1. A005EV8

      Disconnect the 3 connectors and 2 wire harness clamps.

    2. Remove the engine oil level dipstick.

    3. A005A82

      Disconnect the wire harness clamp, and then remove the 2 bolts and engine oil level dipstick guide sub-assembly.

    4. Remove the O-ring from the engine oil level dipstick guide sub-assembly.

    5. A005DIO

      Disconnect the fuel vapor feed hose and ventilation hose.

    6. A005F11

      Remove the 2 bolts, 2 nuts and intake manifold.

    7. Remove the No. 1 intake manifold to head gasket from the intake manifold.

    8. w/ Stud Bolt:


      1. A005CZT

        Using an E6 "TORX" socket wrench, remove the 2 stud bolts from the intake manifold.

        Tech Tips

        If a stud bolt is deformed or the threads are damaged, replace the stud bolt.