REAR SEAT OUTER BELT ASSEMBLY REMOVAL


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY


    1. w/o Headrest:

      Click here

    2. w/ Headrest:

      Click here

  2. REMOVE REAR NO. 2 SEAT ASSEMBLY


    1. w/o Headrest:

      Click here

    2. w/ Headrest:

      Click here

  3. REMOVE REAR NO. 3 SEAT ASSEMBLY


    1. for Bench Type Seatback:

      Click here

    2. for Separate Type Seatback:

      Click here

  4. REMOVE REAR NO. 4 SEAT ASSEMBLY


    1. B007WAV

      Remove the 3 bolts and 2 nuts.

    2. Pull the lever in the direction indicated by the arrow in the illustration, release the 2 locks, and remove the rear No.4 seat assembly.

  5. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO. 1 (for Rear No. 1 Seat Assembly Swiveling Seat Type)


    1. Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.1.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE RECLINING ADJUSTER COVER LH (for Rear No. 1 Seat Assembly Swiveling Seat Type)


    1. Disengage the 2 claws and remove the screw and reclining adjuster cover LH.

  7. REMOVE RECLINING ADJUSTER COVER RH (for Rear No. 1 Seat Assembly Swiveling Seat Type)


    1. Disengage the 2 claws and remove the screw and reclining adjuster cover RH.

  8. REMOVE SEAT TRACK ADJUSTING HANDLE KNOB (for Rear No. 1 Seat Assembly Swiveling Seat Type)


    1. Remove the screw and seat track adjusting handle knob.

  9. REMOVE REAR SEAT TURN TABLE COVER (for Rear No. 1 Seat Assembly Swiveling Seat Type)


    1. Remove the 6 screws and 2 rear seat turntable covers.

  10. REMOVE REAR SEAT BELT ASSEMBLY OUTER (for Rear No. 1 Seat Assembly Swiveling Seat Type)


    1. Remove the bolt and rear seat belt assembly outer.

  11. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO. 2 RH (for Rear No. 2 Seat Assembly)


    1. B007QJT

      Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.2 RH.

      Tech Tips

      Tape the screwdriver tip before use.

  12. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO. 3 RH (for Rear No. 3 Seat Assembly)


    1. B007QJT

      Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.3 RH.

      Tech Tips

      Tape the screwdriver tip before use.

  13. REMOVE RECLINING ADJUSTER COVER RH (for Rear No. 2 Seat Assembly)


    1. B007SHV

      Disengage the 3 claws and remove the 2 screws and reclining adjuster cover RH.

      Tech Tips

      Tape the screwdriver tip before use.

  14. REMOVE RECLINING ADJUSTER COVER RH (for Rear No. 3 Seat Assembly)


    1. B007SHV

      Disengage the 3 claws and remove the 2 screws and reclining adjuster cover RH.

      Tech Tips

      Tape the screwdriver tip before use.

  15. REMOVE REAR SEAT BELT ASSEMBLY INNER (for Rear No. 2 Seat Assembly)


    1. B007VE7

      Remove the bolt and rear seat belt assembly inner.

  16. REMOVE REAR SEAT BELT ASSEMBLY INNER (for Rear No. 3 Seat Assembly)

    Tech Tips

    Follow the same procedure as for the rear No.2 seat assembly.

  17. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO. 2 LH (for Rear No. 2 Seat Assembly)

    Tech Tips

    Use the same procedures for the RH side and LH side.

  18. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO. 3 LH (for Rear No. 3 Seat Assembly)

    Tech Tips

    Use the same procedures for the RH side and LH side.

  19. REMOVE RECLINING ADJUSTER COVER LH (for Rear No. 2 Seat Assembly)

    Tech Tips

    Use the same procedures for the RH side and LH side.

  20. REMOVE RECLINING ADJUSTER COVER LH (for Rear No. 3 Seat Assembly)

    Tech Tips

    Use the same procedures for the RH side and LH side.

  21. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD (for Rear No. 2 Seat Assembly)


    1. B007QOH

      Disengage the hooks and remove the No.2 seat cushion cover sub-assembly with pad.

  22. REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD (for Rear No. 3 Seat Assembly)


    1. B007W1V

      Disengage the hooks and remove the No.3 seat cushion cover sub-assembly with pad.

  23. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Rear No. 2 Seat Assembly)


    1. B007QKY

      Remove the 4 screws.

    2. Remove the 2 bolts and rear seat 3 point type belt assembly.

  24. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Rear No. 3 Seat Assembly)


    1. B007OQ8

      Remove the 8 screws.

    2. Remove the 4 bolts and 2 rear seat 3 point type belt assemblies.

  25. REMOVE NO. 4 SEAT LEG BRACKET REAR (for Rear No. 4 Seat Assembly)


    1. B007PFG

      Remove the bolt, spacer and No.4 seat leg bracket rear.

  26. REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Rear No. 4 Seat Assembly)


    1. B007UZ9

      Remove the screw and reclining adjuster release handle.

  27. REMOVE RECLINING ADJUSTER COVER LH (for Rear No. 4 Seat Assembly)


    1. B007P26

      Disengage the claw and remove the 2 screws and reclining adjuster cover LH.

  28. REMOVE RECLINING ADJUSTER COVER RH (for Rear No. 4 Seat Assembly)


    1. B007OOV

      Disengage the claw and remove the 2 screws and reclining adjuster cover RH.

  29. REMOVE LAP BELT OUTER ANCHOR COVER (for Rear No. 4 Seat Assembly)


    1. B007OI1

      Disengage the 2 claws and remove the lap belt outer anchor cover.

  30. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Rear No. 4 Seat Assembly)


    1. Remove the bolt and disconnect the rear seat 3-point type belt assembly.

  31. REMOVE NO. 4 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD (for Rear No. 4 Seat Assembly)


    1. B007UBD

      Remove the 4 bolts and No.4 seat cushion assembly.

    2. B007PUA

      Disengage the hooks and remove the 2 clips and No.4 seat cushion cover sub-assembly with pad.

  32. REMOVE REAR SEAT HEADREST ASSEMBLY (for Rear No. 4 Seat Assembly)

  33. REMOVE REAR SEAT CUSHION (for Rear No. 4 Seat Assembly)


    1. Remove the screw and rear seat cushion.

  34. REMOVE REAR SEAT HEADREST SUPPORT (for Rear No. 4 Seat Assembly)


    1. B007TP7

      Open the fastener of the No.4 seatback cover sub-assembly.

    2. Disengage the hook and turn back the No.4 seatback cover sub-assembly.

    3. B007OT5

      Disengage the 2 claws and remove the 2 rear seat headrest supports.

  35. REMOVE REAR SEATBACK LOCK BEZEL UPPER (for Rear No. 4 Seat Assembly)

  36. REMOVE REAR SEATBACK LOCK BEZEL LOWER (for Rear No. 4 Seat Assembly)

  37. REMOVE NO. 4 SEATBACK COVER SUB-ASSEMBLY WITH PAD (for Rear No. 4 Seat Assembly)

  38. REMOVE REAR SEAT CUSHION SHIELD INNER NO. 1 (for Rear No. 4 Seat Assembly)


    1. B007OSH

      Remove the 3 screws and rear seat cushion shield inner No. 1.

  39. REMOVE REAR SEAT SHOULDER BELT HOLE COVER (for Rear No. 4 Seat Assembly)


    1. B007PW7

      Remove the 2 screws and rear seat shoulder belt hole cover.

  40. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Rear No. 4 Seat Assembly)


    1. B007QZ5

      Remove the 3 screws.

    2. Remove the nut and rear 3 point type belt assembly.

  41. REMOVE REAR SEAT BELT ASSEMBLY OUTER


    1. B007UGX

      Remove the bolt and disconnect the floor side of the rear seat belt assembly outer.

    2. B007UIK

      Using a screwdriver, detach the 4 claws and open the shoulder side cover of the rear seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    3. B007PB8

      Loosen the bolt and disconnect the shoulder side of the rear seat belt assembly outer.

    4. B007W5L

      Loosen the bolt and remove the rear seat belt assembly outer.

    5. for Rear No. 1 Seat Bench Seat Type:


      1. B007WCI

        w/ Cover:

        Detach the 3 claws and 3 guides, and then remove the side trim cover.

      2. Loosen the bolt and disconnect the floor side of the rear seat belt assembly outer.

        B007QIJE01
        Text in Illustration
        *A w/o Cover *B w/ Cover
      3. B007SMA

        Using a screwdriver, detach the 2 claws and open the shoulder side cover of the rear seat belt assembly outer.

        Tech Tips

        Tape the screwdriver tip before use.

      4. B007OYJ

        Loosen the bolt and disconnect the shoulder side of the rear seat belt assembly outer.

      5. B007THD

        Loosen the bolt.

      6. Detach the 2 claws and remove the retractor cover of the rear seat belt assembly outer.

      7. B007QCN

        Remove the 2 bolts and rear seat belt assembly outer.

    6. w/ Cover:


      1. Remove the bolt from the floor side of the rear seat belt assembly outer.

      2. Remove the side trim cover from the rear seat belt assembly outer.

  42. REMOVE REAR NO. 2 SEAT BELT ASSEMBLY OUTER


    1. B007PJ7

      Remove the bolt and disconnect the floor side of the rear No. 2 seat belt assembly outer.

    2. B007TKK

      Using a screwdriver, detach the 2 claws and open the shoulder side cover of the rear No. 2 seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    3. B007OV4

      Remove the bolt and disconnect the shoulder side of the rear No. 2 seat belt assembly outer.

    4. B007UC0

      Remove the bolt and rear No. 2 seat belt assembly outer.

  43. REMOVE REAR NO. 3 SEAT BELT ASSEMBLY OUTER


    1. B007THR

      Remove the bolt and disconnect the floor side of the rear No. 3 seat belt assembly outer.

    2. B007UIY

      Using a screwdriver, detach the 4 claws and open the shoulder side cover of the rear No. 3 seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    3. B007RRF

      Loosen the bolt and disconnect the shoulder side of the rear No. 3 seat belt assembly outer.

    4. B007T4A

      Using a screwdriver, detach the 4 claws and remove the retractor cover of the rear No. 3 seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    5. B007RLB

      Remove the bolt and rear No. 3 seat belt assembly outer.

  44. REMOVE REAR NO. 4 SEAT BELT ASSEMBLY OUTER


    1. B007VHO

      Remove the bolt and disconnect the floor side of the rear No. 4 seat belt assembly outer.

    2. B007PN1

      Using a screwdriver, detach the 2 claws and open the shoulder side cover of the rear No. 4 seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    3. B007UMD

      Remove the bolt and disconnect the shoulder side of the rear No. 4 seat belt assembly outer.

    4. B007OJ7

      Using a screwdriver, detach the 4 claws and remove the retractor cover of the rear No. 4 seat belt assembly outer.

      Tech Tips

      Tape the screwdriver tip before use.

    5. B007QII

      Remove the bolt and rear No. 4 seat belt assembly outer.