AUXILIARY BATTERY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE AUXILIARY BATTERY


    1. A005AUS

      Open the auxiliary battery terminal cap.

    2. Loosen the nut, and disconnect the positive (+) auxiliary battery cable.

    3. A005BU3

      Disconnect the auxiliary battery thermometer sensor connector.

    4. Disconnect the auxiliary battery hose.

    5. Loosen the nut, and remove the bolt.

    6. Remove the auxiliary battery clamp.

    7. Remove the auxiliary battery.