BACK DOOR COURTESY SWITCH INSPECTION

PROCEDURE

  1. INSPECT BACK DOOR COURTESY LIGHT SWITCH ASSEMBLY

    1. E139234C01

      *a

      Component without harness connected

      (Back Door Courtesy Light Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 - Switch body

      Pin not pushed

      Below 1 Ω

      Pin pushed

      10 kΩ or higher

      If the result is not as specified, replace the back door courtesy light switch assembly.