ENGINE OIL TEMPERATURE SENSOR INSPECTION

PROCEDURE

  1. INSPECT ENGINE OIL TEMPERATURE SENSOR

    1. A171057C01

      *a

      Component without harness connected

      (Engine Oil Temperature Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      30°C (86°F)

      2.647 to 3.021 kΩ
      Note:

      If checking the engine oil temperature sensor in water, be careful not to allow water to contact the terminals. After checking, wipe the water off the engine oil temperature sensor.

      If the result is not as specified, replace the engine oil temperature sensor.