RELAY ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT HEATER RELAY (HTR)

    1. E218162N11

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      3 - 5

      Battery voltage is not applied between terminals 1 and 2

      10 kΩ or higher

      3 - 5

      Battery voltage is applied between terminals 1 and 2

      Below 1 Ω

      • If the result is not as specified, replace the heater relay.