LIGHTING SYSTEM


  1. FUNCTION


    1. The illuminated entry system has the following functions:

      Function Outline Lights that Operate
      Actuation Area-linked

      • When a registered key enters any actuation area around the doors, the lights that operate turn on.

      • When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly
      Door Lock/Unlock-linked

      • When any door is unlocked, the lights that operate turn on.

      • When all doors are locked, the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly

      • Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Door Open/Close-linked

      • When any door is opened, the lights that operate turn on.

      • When all doors are closed, the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly

      • Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Power Switch-linked

      • When the power switch is changed from on (ACC) or on (IG) to off, the lights that operate turn on.

      • When the power switch is changed from off to on (ACC) or on (IG), the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly
      When the power switch is changed from off to on (IG), the lights that operate turn on. Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Shift Position-linked When the power switch is on (IG) and the shift position is moved out of P, the lights that operate dim. Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Delay

      When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:


      • An actuation area-linked function is used.

      • The door unlock-linked function is active.

      • Any door is opened and then all doors are closed when the power switch is off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly

      When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:


      • The door unlock-linked function is active.

      • Any door is opened and then all doors are closed when the power switch is off.

      		 Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Battery Saving

      • When 20 minutes elapse after the power switch is turned from on (ACC) and on (IG) to off and the lights that operate remain on, the lights are turned off.

      • The battery saving function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.


        • The power switch is turned on (ACC) or on (IG)

        • Any door is opened and closed

        • The back door is opened

        • Any door is unlocked

        • The key enters any exterior actuation area

      • Power Switch Illumination

      • Map Light Assembly

      • Vanity Light Assembly LH, RH

      • No. 1 Room Light Assembly

      • No. 2 Room Light Assembly

      • Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)

      • Door Courtesy Light Assembly LH, RH