AUTOMATIC TRANSAXLE SYSTEM


  1. CONSTRUCTION


    1. The transmission control switch is installed inside the transmission floor shift assembly to detect the M mode position and inform the ECM. The ECM indicates the shift position indicator M in the combination meter assembly via CAN.

    2. The transmission control switch detects whether the shift lever is in D or M, detects whether the shift lever is moved to "+" (upshift) or "-" (downshift) when the M mode is selected, and sends signals to the ECM. At this time, the ECM indicates the selected gear position in the combination meter assembly via CAN.

      Figure 1. LHD Models

      A01R7YFC01
      *1 Transmission Floor Shift Assembly *2 Transmission Control Switch

      Figure 2. RHD Models

      A01R7SAC01
      *1 Transmission Floor Shift Assembly *2 Transmission Control Switch