ADJUSTABLE SPEED LIMITER SWITCH INSPECTION

PROCEDURE

  1. INSPECT ADJUSTABLE SPEED LIMITER SWITCH (CRUISE CONTROL MAIN SWITCH)

    1. Measure the resistance according to the value(s) in the table below.

      E394741C01

      *a

      Component without harness connected (Cruise Control Switch)

      -

      -

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (ECC) - 2 (ASL)

      Adjustable speed limiter switch (Cruise control main switch) (ON-OFF button) released

      1 MΩ or higher

      Adjustable speed limiter switch (Cruise control main switch) (ON-OFF button) pushed

      Below 2.5 Ω

      1 (ECC) - 3 (CCS)

      +RES switch operated

      235 to 245 Ω

      -SET switch operated

      617 to 643 Ω

      CANCEL switch operated

      1509 to 1571 Ω

      If the result is not as specified, replace the adjustable speed limiter switch (cruise control main switch).