AMBIENT LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure described below is for the LHD vehicles.

  • Use the same procedure as for the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. B008K7JC02
      *a Clamp
      *b Guide

      Engage the claws to install the No. 1 interior illumination light assembly.

    2. Install the 2 screws.

    3. Engage the guides and clamp to connect the wire harness.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  3. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  4. INSTALL FRONT ARMREST BASE UPPER PANEL (for Driver Side)

    Click here

  5. INSTALL FRONT ARMREST BASE UPPER PANEL (for Front Passenger Side)

    Click here