LIN COMMUNICATION SYSTEM SYSTEM DESCRIPTION

  1. LIN COMMUNICATION SYSTEM DESCRIPTION

    The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of a break in the communication lines or some other reason, the master control ECU of the relevant system stores DTCs. Refer to the table below about the communication bus lines and connected components.

    Tip:

    • Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.

    • In the following table, "○" indicates that the function applies, and "-" indicates that it does not.

    Table 1. Door Bus Lines

    Component

    Master Control

    LIN Communication DTC Output Function

    Main body ECU (multiplex network body ECU)

    ○

    ○

    Double lock door control relay assembly*1

    -

    -

    Front power window regulator motor assembly LH*2

    -

    -

    Front power window regulator motor assembly RH*3

    -

    -

    Sliding roof drive gear sub-assembly*4

    -

    -

    • *1: w/ Double Locking System

    • *2: for LHD, w/ Jam Protection Function

    • *3: for RHD, w/ Jam Protection Function

    • *4: w/ Sliding Roof System

    Table 2. Certification Bus Lines (w/ Entry and Start System)

    Component

    Master Control

    LIN Communication DTC Output Function

    Certification ECU (smart key ECU assembly)

    ○

    ○

    Steering lock actuator assembly

    -

    -

    ID code box (immobiliser code ECU)

    -

    -
    Table 3. Air Conditioning Bus Lines (w/ Automatic Conditioning System)

    Component

    Master Control

    LIN Communication DTC Output Function

    Air conditioning amplifier assembly

    ○

    ○

    Air conditioning control assembly

    -

    -
Table 4. Windshield Wiper Bus Lines (w/ Rain Sensor)

Component

Master Control

LIN Communication DTC Output Function

Windshield wiper relay

○

○

Rain sensor

-

-