SEAT BELT WARNING SYSTEM

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

  • Use the following procedure to troubleshoot the seat belt warning system.

  • *: Use the GTS.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKESHOP

    Result

    Proceed to

    NEXT
    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    1. Interview the customer to confirm the trouble.

      Click hereClick hereClick here

    Result

    Proceed to

    NEXT
    NEXT

  3. INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage.

      Standard Voltage

      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

    Result

    Proceed to

    NEXT
    NEXT

  4. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

    1. Using the GTS, check if the CAN communication system is functioning normally.

      w/ Central Gateway ECU:Click hereClick here

      w/o Central Gateway ECU:Click hereClick hereClick here

      Result

      Result

      Proceed to

      CAN DTCs are not output

      A

      CAN DTCs are output

      B
    B

    GO TO CAN COMMUNICATION SYSTEM

    w/ Central Gateway ECU:Click here

    w/o Central Gateway ECU:Click here

    A

  5. CHECK COMBINATION METER ASSEMBLY

    1. Check the operation of the speedometer and shift indicator* on the combination meter assembly.

      OK

      The speedometer and shift indicator* on the combination meter assembly operate normally.

      • *: for CVT or Multi-Mode Manual Transaxle

    Result

    Proceed to

    OK

    NG
    NG

    GO TO METER / GAUGE SYSTEM

    Click here

    OK

  6. PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table.

      Click here

      Result

      Result

      Proceed to

      Fault is not listed in problem symptoms table

      A

      Fault is listed in problem symptoms table

      B
    B

    REPAIR OR REPLACEClick here

    A

  7. OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Data List / Active Test

      Click here

    2. Terminals of ECU

      Click here

    3. On-vehicle Inspection

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  8. REPAIR OR REPLACE

    Result

    Proceed to

    NEXT
    NEXT

  9. CONFIRMATION TEST

    Result

    Proceed to

    NEXT
    NEXT

    END