HEATED OXYGEN SENSOR INSPECTION


  1. INSPECT HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. B007PGAE01
      Text in Illustration
      *a

      Component without harness connected

      (Heated Oxygen Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (HT) - 2 (+B) 20°C (68°F) 11 to 16 Ω
      1 (HT) - 4 (E1) Always 10 kΩ or higher

      If the result is not as specified, replace the heated oxygen sensor.