PANORAMIC VIEW MONITOR SWITCH REMOVAL

PROCEDURE

1. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

   Click here

3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

   Click here

4. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. REMOVE NO. 2 METER HOOD CLUSTER

   Click here

7. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

8. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

9. REMOVE PANORAMIC VIEW MONITOR SWITCH

   
   
   1. 

      *a	Protective Tape
      	Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the panoramic view monitor switch as shown in the illustration.