STARTER (for 2.7 kW Type) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT FENDER SEAL


    1. Remove the 5 clips and seal.

  3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

    A01DVK3E01

    1. Remove the 2 bolts and disconnect the release cylinder assembly.

  4. REMOVE STARTER ASSEMBLY


    1. Disconnect the starter connector.

    2. Remove the nut and disconnect the starter wire.

    3. A01E2QV

      Remove the 2 nuts, bolt, and disconnect the ground cable.

    4. Remove the starter.