ROOM TEMPERATURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE

  1. INSTALL COOLER (ROOM TEMPERATURE SENSOR) THERMISTOR

    1. Connect the connector and aspirator pipe to the cooler (room temperature sensor) thermistor.

    2. Attach the 2 claws to install the cooler (room temperature sensor) thermistor.

  2. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click hereClick here

  3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY

    Click hereClick here

  4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click hereClick here

  5. INSTALL NAVIGATION RECEIVER (w/ Navigation System)

    Click hereClick here

  6. INSTALL RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)

    Click hereClick here

  7. INSTALL STEREO OPENING COVER (w/o Audio)

    Click hereClick here

  8. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click hereClick here

  9. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click hereClick here

  10. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click hereClick here