CYLINDER HEAD GASKET COMPONENTS
ILLUSTRATION
*1 |
CYLINDER HEAD GASKET |
*2 |
CYLINDER HEAD SUB-ASSEMBLY |
*3 |
EXHAUST FUEL ADDITION INJECTOR ASSEMBLY |
*4 |
FUEL INJECTOR SEAL |
*5 |
GLOW PLUG ASSEMBLY |
*6 |
NO. 1 GLOW PLUG CONNECTOR |
*7 |
GLOW PLUG SCREW GROMMET |
*8 |
WASHER |
*9 |
NO. 1 NOZZLE HOLDER CLAMP |
*10 |
GASKET |
*11 |
PLATE WASHER |
*12 |
CYLINDER HEAD SET BOLT |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
*T1 |
for New Bolt: 1st: 50 (510, 37) 2nd: Turn 90° 3rd: Turn 90° 4th: Turn 90° 5th: Loosen 90° 6th: Loosen 90° 7th: Turn 90° 8th: Turn 90° 9th: Turn 90° for Used Bolt: 1st: 50 (510, 37) 2nd: Turn 90° 3rd: Turn 90° 4th: Turn 90° |
- |
- |