FRONT BUMPER(for Sedan) REASSEMBLY

PROCEDURE

  1. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

    1. B350510

      Install the front bumper reinforcement sub-assembly with the 8 bolts.

      50 N*m

      510 kgf*cm

      37 ft.*lbf

    2. Engage each clamp.

  2. INSTALL FRONT BUMPER ENERGY ABSORBER

    1. B350509

      Engage the 6 guides to install the front bumper energy absorber.

  3. INSTALL FRONT BUMPER SIDE SUPPORT LH

    1. B350508C02

      *a

      Bolt

      *b

      Screw

      Engage the 3 claws.

    2. Install the front bumper side support LH with the bolt and screw.

      Bolt

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

  4. INSTALL FRONT BUMPER SIDE SUPPORT RH

    Tip:

    Use the same procedure as for the LH side.

  5. INSTALL LOWER NO. 1 RADIATOR GRILLE

    1. B350506

      Engage the 2 guides and 19 claws.

    2. B351234

      Install the lower No. 1 radiator grille with the 2 screws.

  6. INSTALL FOG LIGHT COVER LH (w/o Bracket)

    1. B352321

      Engage the 4 claws to install the fog light cover LH.

  7. INSTALL FOG LIGHT COVER RH (w/o Bracket)

    Tip:

    Use the same procedure as for the LH side.

  8. INSTALL FRONT BUMPER HOLE COVER LH (w/ Bracket)

    1. B351235

      Engage the 2 guides and 3 claws to install the fog light mounting bracket LH.

    2. B350505

      Engage the 4 claws to install the front bumper hole cover LH.

  9. INSTALL FRONT BUMPER HOLE COVER RH (w/ Bracket)

    Tip:

    Use the same procedure as for the LH side.

  10. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  11. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tip:

    Use the same procedure as for the LH side.

  12. INSTALL FRONT BUMPER HOLE COVER

    1. B350507C02

      *a

      Hook

      Engage the hook.

    2. Engage the 2 claws to install the front bumper hole cover.

  13. INSTALL FRONT FENDER LINER RETAINER

    1. B350504

      Engage the claw to install the front fender liner retainer.

      Tip:

      Use the same procedure for the RH side and LH side.

  14. INSTALL NO. 5 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)

    1. Engage the 11 clamps to install the No. 5 engine room wire.

      B350503

  15. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  16. INSTALL ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  17. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  18. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  19. INSTALL ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  20. INSTALL NO. 2 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  21. INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)

    1. Engage the 8 clamps to install the headlight cleaner hose.

      B350498

  22. INSTALL NO. 2 HEADLIGHT CLEANER CLAMP (w/ Headlight Cleaner System)

    Click here

  23. INSTALL NO. 1 HEADLIGHT CLEANER CLAMP (w/ Headlight Cleaner System)

    Tip:

    Use the same procedure for the No. 2 headlight cleaner clamp.

  24. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  25. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tip:

    Use the same procedure as for the LH side.

  26. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER LH (w/ Headlight Cleaner System)

    Click here

  27. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER RH (w/ Headlight Cleaner System)

    Tip:

    Use the same procedure as for the LH side.