CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE VVT SENSOR


    1. for Exhaust Side:


      1. A01OBK3

        Disconnect the VVT sensor connector.

      2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

        Note

        If the VVT sensor has been struck or dropped, replace it.

    2. for Intake Side:


      1. A01ODRN

        Disconnect the VVT sensor connector.

      2. Remove the bolt and VVT sensor from the cylinder head cover sub-assembly.

        Note

        If the VVT sensor has been struck or dropped, replace it.