FRONT WIPER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WIPER ARM HEAD CAP


    1. A005EH2E05
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 3 claws and remove the front wiper arm head cap.

      Tech Tips


      • Tape the screwdriver tip before use.


      • Use the same procedure for the RH side and LH side.

  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    1. A005CW4

      Remove the nut and front wiper arm and blade assembly LH.

  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    1. A005D8F

      Remove the nut and front wiper arm and blade assembly RH.

  4. REMOVE FRONT VENTILATOR ASSEMBLY


    1. A005ACC

      Disengage the 2 claws and remove the front ventilator assembly as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  5. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    1. A005ES2

      Remove the 2 clips.

    2. for LHD:


      1. Disengage the 5 claws and 3 guides.

        A005ADB

    3. for RHD:


      1. Disengage the 6 claws and 3 guides.

        A005E0V

    4. Disengage the 9 guides and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.

      A005BGU

  6. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Operate the wiper and stop the windshield wiper motor at the automatic stop position.

    2. A005CQ3E01
      Text in Illustration
      *1 Grommet

      Disengage the 2 clamps.

    3. Remove the 2 bolts.

    4. Disengage the grommet and remove the windshield wiper motor and link assembly as shown in the illustration.

      Note

      Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.

    5. A005DEU

      Disconnect the connector.

  7. REMOVE FRONT WIPER CRANK SUB-ASSEMBLY


    1. A005EIPE03
      Text in Illustration
      *1 Protective Tape
      *2 No. 1 Rod
      *a Crank Arm Pivot

      Using a screwdriver, separate the No. 1 rod from the crank arm pivot of the front wiper crank sub-assembly as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A005AR5

      Remove the nut and front wiper crank sub-assembly.

  8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A005DVJ

      Remove the 2 bolt, No. 1 windshield wiper link washer and windshield wiper motor assembly.