NAVIGATION ANTENNA REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  4. REMOVE NAVIGATION ANTENNA ASSEMBLY


    1. A01DYYR

      Detach the clamp and disconnect the connector.

    2. Remove the 2 screws and navigation antenna assembly.

  5. REMOVE NO. 1 NAVIGATION ANTENNA CORD SUB-ASSEMBLY


    1. A01E09K

      Disconnect the connector.

    2. Detach the clamp and remove the No. 1 navigation antenna cord sub-assembly.