Refer to the TOYOTA Repair Manual for each work procedure.
PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL
| Necessary Procedure | Effect or Inoperative Function when Necessary Procedure is not Performed |
|---|---|
| Drive the vehicle until stop and start control is permitted (approximately 5 to 60 minutes) | Stop and start system |
| Memorize steering angle neutral point | Pre-crash safety system |
Note
After the ignition switch is turned off, the navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.