AIR FUEL RATIO SENSOR INSPECTION

PROCEDURE

  1. INSPECT AIR FUEL RATIO SENSOR

    1. A119369E62

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (HA1A) - 2 (+B)

      20°C (68°F)

      1.6 to 3.2 Ω

      1 (HA1A) - 4 (A1A-)

      Always

      10 kΩ or higher
      Table 1. Text in Illustration

      *a

      Component without harness connected

      (Air Fuel Ratio Sensor)

      If the result is not as specified, replace the air fuel ratio sensor.