ENGINE COMPARTMENT THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Point E, e on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Fender Extension Installation nut | M6 (0.24) |
| B, b | Front Spring Support Installation Hole | φ9.5 (0.37) |
| C, c | Hood Hinge Installation Nut | M8 (0.31) |
| D | Cowl Panel Installation Hole | φ7 (0.28) |
| E, e | Earth Installation Nut | M6 (0.24) |
| F, f | Front Side Member Standard Hole | φ14 (0.55) |
| G, g | Radiator Support Upper Installation Nut | M8 (0.31) |
| H, h | Front Bumper Reinforcement Installation Nut | M8 (0.31) |
| J, j | Hood Lock Support Installation Nut | M6 (0.24) |
| K, k | Fender Apron Bracket Standard Hole | φ8 (0.31) |
| L, l | Radiator Support Upper Installation Nut | M8 (0.31) |
| M, m | Front Fender Extension Installation nut | M6 (0.24) |
| N, n | Front Fender Extension Installation nut | M6 (0.24) |
| O, o | Headlight Installation Nut | M6 (0.24) |
| *1 | Distance between points other than those above |
| *2 | Height from Imaginary Datum Line |
| *3 | mm |
| *4 | (in.) |