PARKING BRAKE PEDAL(for LHD) REMOVAL

CAUTION / NOTICE / HINT

Note

While the auxiliary battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing brake system components, do not depress the brake pedal or open/close the doors while the auxiliary battery is connected.

PROCEDURE


  1. REMOVE HV BATTERY

    Click here

  2. REMOVE AIR CONDITIONING UNIT ASSEMBLY

    Click here

  3. LOOSEN ADJUSTING NUT


    1. A005DNZE03
      Text in Illustration
      *1 Lock Nut
      *2 Adjusting Nut

      Remove the lock nut and loosen the adjusting nut.

  4. SEPARATE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY


    1. A005B7WE02
      Text in Illustration
      *a Turn
      *b Hold

      Separate the No. 1 parking brake pull rod sub-assembly from the parking brake control pedal assembly as shown in the illustration.

  5. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY


    1. A005AL1

      Remove the 4 bolts and nut, and separate the No. 1 parking brake cable assembly.

    2. Disengage the 2 wire harness clamps.

    3. Remove the No. 1 parking brake cable assembly from the clamp.

    4. A0059S1

      Disconnect the parking brake switch connector.

    5. Disengage the wire harness clamp.

    6. A005F17

      Remove the bolt, 2 nuts and parking brake control pedal assembly.