PRE-COLLISION SYSTEM CANCEL SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY

    1. for LHD:

      1. Attach the 2 claws to install the pre-collision system cancel switch assembly.

    2. for RHD:

      1. Attach the 2 claws to install the pre-collision system cancel switch assembly.

  2. INSTALL FUSE BOX OPENING COVER

    Click here

  3. INSTALL NO. 2 SWITCH HOLE BASE

    Click here

  4. INSTALL COWL SIDE TRIM BOARD LH

    Click hereClick here

  5. INSTALL FRONT DOOR SCUFF PLATE LH

    Click hereClick here