FRONT DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. A001X2WC01
      B008LJK Install in this Direction

      Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Connect the connector.

  2. INSTALL CENTER PILLAR LOWER GARNISH

    Click here

  3. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP


    1. A001V8Y

      Connect the rear door opening trim weatherstrip to the area shown in the illustration.

  4. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. A001SPW

      Connect the front door opening trim weatherstrip to the area shown in the illustration.

  5. CONNECT FRONT SEAT OUTER BELT ASSEMBLY

    Click here

  6. INSTALL LAP BELT OUTER ANCHOR COVER

    Click here

  7. INSTALL REAR DOOR SCUFF PLATE

    Click here

  8. INSTALL FRONT DOOR SCUFF PLATE

    Click here

  9. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  10. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here