BRAKE ACTUATOR(w/ VSC) REASSEMBLY

PROCEDURE

  1. INSTALL BRAKE ACTUATOR BOLT CUSHION

    1. Install the 4 brake actuator bolt cushions to the brake actuator bracket.

  2. INSTALL BRAKE ACTUATOR CASE COLLAR

    1. Install the 4 brake actuator case collars to the brake actuator bolt cushions.

      Note:

      Make sure the collars are in full contact with the cushions.

  3. INSTALL BRAKE ACTUATOR BRACKET

    1. C191858E01

      Install the brake actuator bracket to the brake actuator with the 4 bolts.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

      Note:

      • Tighten the 4 bolts uniformly in alphabetical order.

      • If the actuator is dropped, replace it.