LIGHTING SYSTEM


  1. FUNCTION


    1. The illuminated entry system has the following functions:

      Function Outline Lights that Operate
      Actuation Area-linked

      • When a registered key enters any actuation area around the doors, the lights that operate turn on.

      • When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly
      Door Lock/Unlock-linked

      • When any door is unlocked, the lights that operate turn on.

      • When all doors are locked, the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly

      • Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Door Open/Close-linked

      • When any door is opened, the lights that operate turn on.

      • When all doors are closed, the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly

      • Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Power Switch-linked

      • When the power switch is changed from on (ACC) or on (IG) to off, the lights that operate turn on.

      • When the power switch is changed from off to on (ACC) or on (IG), the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly
      When the power switch is changed from off to on (IG), the lights that operate turn on. Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Shift Position-linked When the power switch is on (IG) and the shift position is moved out of P, the lights that operate dim. Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Delay

      When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:


      • An actuation area-linked function is used.

      • The door unlock-linked function is active.

      • Any door is opened and then all doors are closed when the power switch is off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly

      When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:


      • The door unlock-linked function is active.

      • Any door is opened and then all doors are closed when the power switch is off.

      		 Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)
      Battery Saving When no changes occur in the condition of the doors for 20 minutes and a key is not in the actuation area, these lights turn off.

      • Power Switch Illumination

      • Map Light Assembly

      • No. 1 Room Light Assembly
      When no changes occur in the condition of the doors for 20 minutes, the lights that operate turn off. Footwell Lights (No. 1 Interior Illumination Light Assembly LH, RH)