UNDER BODY THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Point J, j and K, k on the vehicle are asymmetrical.

  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Under Cover Installation Nut M8 (0.31)
B, b Front Bumper Reinforcement Installation Nut M8 (0.31)
C, c Front Side Member Standard Hole φ18 (0.71)
D, d Front Suspension Member Installation Nut M12 (0.47)
E, e Front Suspension Member Installation Nut M12 (0.47)
F, f Sub Frame Installation Nut M10 (0.39)
G, g Torque Box Standard Hole φ25 (0.98)
H, h Front Side Member Standard Hole φ18 (0.71)
J, j Engine Rear Mounting Member Installation Nut M10 (0.39)
K, k Propeller Shaft Center Support Bearing Installation Nut M10 (0.39)
L, l Front Floor Reinforcement Standard Hole φ13 (0.51)
M, m Front Crossmember Side Gusset Standard Hole φ13 (0.51)
N, n Support Sub Frame Installation Nut M10 (0.39)
O, o Rear Suspension Member Installation Nut M14 (0.55)
P, p Rear Suspension Member Installation Nut M14 (0.55)
Q, q Rear Floor Side Member Standard Hole φ18 (0.71)
A004L6ME01