POWER DOOR LOCK CONTROL SYSTEM OPERATION CHECK

  1. CHECK POWER DOOR LOCK OPERATION

    Note:

    The operation check below is based on the non-customized initial condition of the vehicle.

    1. Check basic functions.

      1. Check that all doors lock when the driver door lock knob is moved to the lock position.

      2. Check that all doors unlock when the driver door lock knob is moved to the unlock position.

      3. Check that driver door lock when the driver door key cylinder is turned to lock using the mechanical key.

      4. Check that driver door unlock when the driver door key cylinder is turned to unlock using the mechanical key.

    2. Check the key lock-in prevention function. (w/ Entry and Start System)

      Note:

      In order to prevent the key from being locked in the vehicle, the following inspection should be performed with the driver door window open.

      1. Turn the ignition switch to ON or ACC.

      2. With the driver door open, check that all doors unlock immediately after the driver door lock knob is pressed.

      3. With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all doors unlock.