NAVIGATION ECU INSTALLATION

PROCEDURE

1. INSTALL NAVIGATION ECU

2. INSTALL NO. 1 RADIO RECEIVER BRACKET

   Click here

3. INSTALL NO. 2 RADIO RECEIVER BRACKET

   Click here

4. INSTALL ANTENNA CORD SUB-ASSEMBLY

   
   

   1. Connect the 2 connectors.

   2. Engage the clamp to install the antenna cord sub-assembly.

5. INSTALL NO. 1 NAVIGATION WIRE

   
   

   1. Connect each connector to install the No. 1 navigation wire.

6. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

   Click here

7. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

8. INSTALL INSTRUMENT PANEL BOX ASSEMBLY

   Click here

9. INSTALL INTEGRATION CONTROL AND PANEL

   Click here

10. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

11. INSTALL DECK FLOOR BOX RH

    Click here

12. INSTALL REAR DECK FLOOR BOX

    Click here

13. INSTALL NO. 1 DECK BOARD

    Click here

14. INSTALL NO. 2 DECK BOARD

    Click here

15. INSTALL DECK BOARD ASSEMBLY

    Click here