FRONT SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE

Tip:

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Table 1. Measuring Point Name

Symbol

Name

Hole Diameter

mm (in.)

A, a

Front Suspension Lower Arm Installation Hole

φ17.5 (0.69)

B, b

Front Suspension Crossmember Installation Hole

φ22 (0.87)

C, c

Steering Gear Box Installation Hole

φ17 (0.67)

D, d

Front Suspension Crossmember Standard Hole

φ24 (0.94)
K138065C01

*A

FRONT

*B

LH

*C

RH

-

-

*a

mm

(in.)

-

-