METER / GAUGE SYSTEM


  1. OUTLINE


    1. The combination meter assembly has a built-in meter ECU and buzzer.

    2. Depending on the specifications of the vehicle, the combination meter has a 4.2 inch or 7 inch multi-information display.

    3. A multi-information display on which various kinds of information is displayed is integrated.

      Figure 1. Models with 4.2 Inch Multi-information Display

      B00833OC01
      *a Multi-information Display *b The illustrations are examples that shows the locations of the indicators.

      Figure 2. Models with 7 Inch Multi-information Display

      B0082WLC01
      *a Multi-information Display *b The illustrations are examples that shows the locations of the indicators.

    4. Headup Display


      1. A headup display has been adopted to enable the driver to see driving information more easily within their field of view.

      2. The meter mirror sub-assembly and the structure of the windshield glass enables the headup display to project an image as if it is displayed outside of the windshield glass.

        Figure 3. LHD Models

        B008336C01
        *a Projected Image from the Headup Display *b The illustrations shown are examples only.

        Figure 4. RHD Models

        B00833XC02
        *a Projected Image from the Headup Display *b The illustrations shown are examples only.

  2. MAIN FEATURES


    1. Combination Meter Assembly (Models with 4.2 Inch Multi-information Display)


      1. Opening/Ending Ceremony


        • An opening ceremony which allows for anticipation of a pleasant drive is used. The opening ceremony operates as follows:

          Tech Tips

          The following illustration shows the flow of the opening and ending ceremony from when the ignition switch is off and then the engine is started, to when the ignition switch is turned off again.


          1. When the ignition switch is turned on (IG), the multi-information display illuminate.

          2. Then, the needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge illuminate.

          3. When the ignition switch is turned off, only the odometer is displayed on the multi-information display.

          4. The needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge fade out.

          5. Then, the odometer fade out.

            B0082OIC01
            *a IG ON *b IG OFF
            *c The illustrations shown are examples only. - -

      2. Multi-information Display


        • The multi-information display is located at the center of the combination meter assembly.

        • The multi-information display shows the following information.

          Item Outline
          Shift Position Indicator The current shift position is displayed.
          Outside Temperature

          • The outside temperature is displayed.

          • When the outside temperature drops below 3°C (37°F), an ice warning to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning flashes 10 times, the ice warning stay on. When the temperature reaches 5°C (41°F), the ice warning goes off.
          Indicator/Warning

          • When the display conditions are met, the following indicators illuminate.


            • Cruise Control Indicator*1, *2

            • Cruise Control Indicator (Constant Speed Control Mode)*3

            • Cruise Control Indicator (Vehicle-to-Vehicle Distance Control Mode)*3

            • Cruise SET Indicator*2, *3

            • Lane Departure Alert Indicator*3
          Dynamic Radar Cruise Control System/Lane Departure Alert System State*3 Displays the operating state of the dynamic radar cruise control system and lane departure alert system
          Information

          • The following information can be displayed on the multi-information display by switching the tabs.


            • Drive Information Tab

            • Warning Message Tab

            • Settings Tab

          Tech Tips

          The tab can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.
          Interrupt Display

          • When the display conditions are met, the following screen is interrupt display.


            • Advisory Display/Warning Display

            • Driving Assist System Information*3

            • Rheostat
          ODO/TRIP Meter

          • The odometer, trip meter A or trip meter B are displayed.

          • The item shown can be switched by pressing the ODO/TRIP switch.
          Light Control Rheostat Meter panel luminance can be changed by using the rheostat switch.

          *1: Except Models with Toyota Safety Sense

          *2: Models with cruise control system

          *3: Models with Toyota Safety Sense

        • The drive information shows the following information.

          Item Outline
          Drive Information

          • The following items can be displayed.


            • Trip (After Start)


              1. Average Fuel Consumption After Engine Start-up

              2. Average Vehicle Speed After Engine Start-up

              3. Elapsed Time After Engine Start-up


            • Total (After Reset)


              1. Current Fuel Consumption (Bar Display)

              2. Average Fuel Consumption Between Reset Operations

              3. Total Average Vehicle Speed Between Reset Operations


            • Tank (After Refuel)


              1. Cruising Range

              2. Average Fuel Consumption After Refueling

          • In addition to the above functions, the following items can be displayed.


            • Eco Driving Indicator Zone Display

            • Vehicle speed

            • Blank

          Tech Tips

          The item shown can be changed using the UP/DOWN switch of the steering pad switch assembly.

    2. Combination Meter Assembly (Models with 7 Inch Multi-information Display)


      1. Opening/Ending Ceremony


        1. When the ignition switch is turned on (IG), the needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge illuminate.

        2. The multi-information display illuminate.

        3. When the ignition switch is turned off, only the odometer is displayed on the multi-information display.

        4. The needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge fade out.

        5. Then, the odometer fade out.

          B00831EC01
          *a IG ON *b IG OFF
          *c The illustrations shown are examples only. - -

      2. Multi-information Display


        • The multi-information display is located at the center of the combination meter assembly.

        • The multi-information display shows the following information.

          Item Outline
          Indicator

          • When the display conditions are met, the following indicators illuminate.


            • Blind Spot Monitor Indicator*1

            • RCTA Indicator*1

            • Clearance Sonar Indicator*2

            • Lane Departure Alert Indicator*3

            • Cruise SET Indicator*3, *4

            • Cruise Control Indicator*4, *5

            • Cruise Control Indicator (Constant Speed Control Mode)*3

            • Cruise Control Indicator (Vehicle-to-Vehicle Distance Control Mode)*3

            • Automatic High Beam Indicator*3

            • Front Fog Light Indicator

            • Rear Fog Light Indicator*6

            • Eco Mode Indicator*7

            • Sport Mode Indicator*7

            • ECO Indicator
          Dynamic Radar Cruise Control System/Lane Departure Alert System State*3 Displays the operating state of the dynamic radar cruise control system and lane departure alert system
          Information

          • The following information can be displayed on the multi-information display by switching the tabs.


            • Warning Message Tab

            • Fuel Economy Tab

            • Driving Assist System Information Tab

            • Audio Information Tab*8

            • Vehicle Information Tab

            • Settings Tab

          Tech Tips

          The tab can be switched using the UP/DOWN switch of the steering pad switch assembly.
          Outside Temperature

          • The outside temperature is displayed.

          • When the outside temperature drops below 3°C (37°F), an ice warning to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning flashes 10 times, the ice warning stay on. When the temperature reaches 5°C (41°F), the ice warning goes off.
          Shift Position Indicator The current shift position is displayed.
          ODO/TRIP Meter

          • The odometer, trip meter A or trip meter B are displayed.

          • The item shown can be switched by pressing the ODO/TRIP switch.
          Vehicle Power Source State

          • The vehicle power source state is displayed.

          • The following indicator is displayed on the multi-information display.


            • Smart Indicator
          Light Control Rheostat Meter panel luminance can be changed by using the rheostat switch.

          *1: Models with blind spot monitor system

          *2: Models with TOYOTA parking assist-sensor system

          *3: Models with Toyota Safety Sense

          *4: Models with cruise control system

          *5: Except models with Toyota Safety Sense

          *6: Models with rear fog lights

          *7: Models with drive mode select switch

          *8: Models with audio system

        • The fuel economy tab shows the following information

          Fuel Economy Information

          • The following items can be displayed.


            • Eco Driving Indicator Zone Display

            • Current Fuel Consumption

            • Average Fuel Economy (After Start)

            • Driving Range

            • Gadget

              Tech Tips

              The following items can be selected in meter settings in gadget content and fuel economy type.


              1. No Display

              2. Average Speed (After Start)

              3. Average Speed (After Reset)

              4. Distance Travelled (After Start)

              5. Distance Travelled (After Reset)

              6. Elapsed Time (After Start)

              7. Elapsed Time (After Reset)

            • Average Fuel Economy

              Tech Tips

              The following items can be selected in Meter Settings in fuel economy type.


              1. After Reset

              2. After Refuel

        • The driving assist system information tab shows the following information

          Navigation System Information*1

          • The following items can be displayed.


            • Compass

            • Turn-by-turn
          Dynamic Radar Cruise Control System Information*2 Dynamic radar cruise control system operation information is displayed.
          Lane Departure Alert System Information*2 Lane departure alert system operation information is displayed.

          *1: Models with navigation system

          *2: Models with Toyota Safety Sense

        • The audio information tab displays following information (Models with audio system)

          Audio Information

          The audio source or an audio track can be selected.

          Tech Tips

          When audio information is being displayed, the audio system can be operated using the steering pad switch assembly.

        • The vehicle information tab shows the following information

          Tire Pressure Status*1

          • Receives and displays the tire pressure of each tire.

          • Tire pressure is displayed as blank when the tire pressure signal cannot be received.

          • The tire pressure value is highlighted to warn the driver if the tire pressure drops below the threshold.
          System Status

          • The following items can be displayed.


            • Pre-collision system*2

            • Clearance sonar system*3

            • Blind spot monitor system*4

            • RCTA*4

          Tech Tips

          When changing the items above, press the up or down switch of the steering pad switch assembly to navigate to the desired item, then press the OK switch to select.

          *1: Models with tire pressure warning system

          *2: Models with Toyota Safety Sense

          *3: Models with TOYOTA parking assist-sensor system

          *4: Models with blind spot monitor system

          Tech Tips

          The tire pressure status or system status can be selected by pressing the left/right switch of the steering pad switch assembly.

    3. Headup Display


      1. The headup display shows the following information:

        Figure 5. LHD Models

        B00830NE01

        The illustrations shown are examples only.

        Figure 6. RHD Models

        B0082OTE02

        The illustrations shown are examples only.

        Area Displayed Item
        Full screen Pre-collision System Display*1
        a TOYOTA Parking Assist-sensor System Display*2
        b

        • The following items can be displayed.


          • Dynamic Radar Cruise Control System Display*1

          • Lane Departure Alert System Display*1

          • TOYOTA parking assist-sensor system detection display*2

          • Navigation System Display*3

          • Compass*3
        c

        • The following items can be displayed.


          • Hands off steering wheel alert display*1

          • Unsteady driving alert display*1

          • Master Warning

          • Outside temperature/icy street warning display

          • Information

          • Telephone

          • Audio system operation status display*4

          • Tachometer
        d Speedometer
        e Shift Position Indicator

        *1: Models with Toyota Safety Sense

        *2: Models with TOYOTA parking assist-sensor system

        *3: Models with navigation system

        *4: Models with audio system

  3. PRECAUTION


    1. Ignition Switch Expressions


      1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Expressions Ignition Switch (Position) Engine Switch (Condition)
        Ignition Switch off LOCK Off (LOCK)
        Ignition Switch ACC ACC On (ACC)
        Ignition Switch ON ON On (IG)
        Engine Start START On (Start)